Xenum Chain Pro 500ml

Xenum Chain Pro is a high-performance synthetic chain spray reinforced with ceramic Cerflon® technology.

Developed for demanding professional use, this lubricant guarantees complete protection and optimal performance for chains under all conditions.

And now it is available for all riders – from occasional enthusiasts to racing drivers and world travelers!

Its advanced, ultra-penetrative, and anti-corrosive formula makes it the perfect choice for motorcycles of all sizes, enduros, motocross bikes, and mopeds.

Features

• Cerflon® reinforced: The ceramically reinforced formula provides unequaled protection against wear and power loss.
• Excellent adhesion: Adheres tightly to the chain surface and does not fling off even at extremely high speeds.
• Moisture protection: Displaces moisture effectively and forms a completely waterproof protective layer.
• Superior penetration: The ultra-penetrative formula lubricates every moving part, such as pins and rollers, from the inside out.
• Safe for materials: Does not damage or react with non-metallic materials such as varnish, plastic, or rubber.

The Cerflon® technology contained in the product improves the durability of the lubricating film and significantly reduces power loss and wear throughout the drive system. The chain oil forms a waterproof protective film on the chain surface that effectively repels dirt and displaces moisture. It adheres outstandingly to the chain even at extremely high rotation speeds (high-speed adhesion), thus extending the life of both chains and sprockets.

Instructions for use

Suitable for all standard chains as well as O-RING, X-RING, and Z-RING sealed chains.

1. Shake the bottle well before use.
2. Spray the product evenly along the entire length of the chain on its inner surface (the side facing the sprocket).
3. The product achieves full adhesion and fixes completely within a few minutes after spraying.
4. Do not spray the valve empty.

The Chain Pro film generally does not need to be removed before a new treatment, but if necessary, it can be easily washed off with conventional cleaning agents or chain cleaner.

Technical specifications

• Operating temperature range: -40 °C ... +250 °C
• Form: Aerosol (spray)
• Boiling point: -44 °C
• Flash point: -97 °C
• Ignition temperature: 200 °C
• Vapour pressure (20 °C): 4 Bar
• Density (20 °C): 0.725 g/cm³
• Solubility in water: Not miscible with water / difficult to mix
• Packaging size: 500 ml spray bottle (wholesale pack 12 x 500 ml)

FAQ

What makes Xenum Chain Pro different from ordinary chain sprays?

Its secret is the Cerflon® technology. Cerflon® is a ceramically reinforced PTFE compound that significantly improves the lubricant's pressure resistance and wear protection. In addition, the composition of Chain Pro is optimized to stay attached to the chain at very high speeds, so it does not splatter around like conventional oils.

Does this chain lube fly off the motorcycle chain at high speeds?

No, it doesn't, as long as you follow the instructions for use. Due to its special synthetic composition, the product is sprayed onto the chain in a very fluid state so that it penetrates inside the joints.

Once you allow it to set and settle for a few minutes, it becomes extremely tacky and adheres to the chain perfectly, withstanding even extreme rotation speeds.

Do I need to remove the old Chain Pro layer before a new application?

Generally speaking, the Chain Pro lubricant does not need to be removed from the chain before a new treatment. However, if the chain has accumulated a lot of loose dirt or sand, it can be cleaned very easily with conventional cleaning agents before re-lubricating.