JR Wheels JR29 17x7 ET20-40

Stylish JR rims with your desired bolt pattern and offset.

You can choose, for example, a 4x110 bolt pattern, which is used in almost all CFMOTO ATVs and is apparently common in many other ATVs.

Also available in 5x114.3 suitable for the U10 model.

And of course, common automotive bolt patterns are available to choose from!

Features

• Customizable bolt spacing and ET/offset
• Rim diameter 17 inches
• Rim width 7 inches
• Load capacity 690 kg
• CB 67.1

How do I choose the right ET for my ATV?

We recommend choosing an ET of 20-35 for your ATV, which is the smallest possible offset. This means that the rim is as far out from the center as possible. A general rule of thumb is that the ET can deviate from the standard +/- 10.

ET measurement instructions:

1. Measure the overall width of the rim (from the outer edge of the rim to the outer edge, not the tire surface) in millimeters.
2. Divide the width by two to get the actual centerline of the rim.
3. Measure the distance from the rear edge of the rim to the mounting surface (backspacing) in millimeters.
4. Calculate the difference: Centerline - backspacing = ET number.

Example: If the rim is 200mm wide, the centerline is 100mm and the distance from the rear edge to the mounting surface is 78mm, the ET is 100-78 = 22.






.