Xenum ADMAX PRO AdBlue® Cleaner

Xenum ADMAX PRO is a powerful "one-shot" additive designed for cleaning the AdBlue system. 

It is designed to help with problems caused by urea crystallization and dirty injectors in the SCR system.

You can use it regularly, e.g. during servicing, or when your AdBlue system starts acting up. This is a stronger version of the ADMAX additive, intended for corrective and deep-cleaning use.

Features

• Cleans: designed to dissolve crystallization and dirt from the AdBlue tank, pump and injectors.
• Helps in problem situations: you can try it, for example, when the AdBlue warning light comes on or you suspect a blockage. It may revive the system without having to replace expensive parts.
• Supports SCR system operation: helps keep the system cleaner, which supports its normal operation.
• Easy to use: pour the contents of the bottle into the AdBlue tank and fill the tank with AdBlue.

When should you choose the PRO version?

• When the system is malfunctioning or you suspect a blockage.
• Regularly during servicing, or once a year for a deep clean of the system.

Unlike additives intended only for maintenance, ADMAX PRO contains more powerful cleaning ingredients intended to remove deposits that have already formed. The additive does not replace repairing or replacing a damaged part if a component is broken.

Instructions for use

1. Pour the entire contents of the bottle (250 ml) into the AdBlue tank (NOTE: do not pour it into the fuel tank!).
2. One bottle is enough to treat up to 20 litres of AdBlue.
3. Fill the tank with AdBlue.

You can also mix the additive into the AdBlue beforehand.

If the system already has a malfunction, you may need to drive about 100 km after adding the additive so that it has time to take effect.

Technical data

• Package size: 250 ml (one-shot bottle)
• Form: liquid
• Density (20 °C): 1.08 g/cm³
• pH value: 9.4
• Flash point: > 100 °C