Iron Baltic Kaksikanavainen hydrauliyksikkö

Then, when you start getting really busy and want to stop lifting the bucket with the winch or adjusting the blades of a V-plough while sitting on the bench, the implements can be equipped with hydraulics. This hydraulic unit provides power to the hydraulic working cylinders and makes the work considerably more efficient.

There is no bucket that can be lifted with a winch on a wheel loader!

A 12V electric unit that fits on the front rack of an ATV, for example, and a special rack is available for UTV models if no other place can be found. The power supply is taken from the ATV.

The hydraulic unit has two pairs of connector connections that enable the movement of two different hydraulic cylinders (e.g. lifting and turning the plough disc).

The hydraulics are controlled by a joystick-style, wired switch. Allows the use of a "free float" feature on one cylinder, which is useful for controlling the up-and-down movement of plowing, for example.

The joystick also has a switch that can be used to control a solenoid valve. This allows you to change the controlled working cylinder and thus expand the two-channel unit to three working cylinders.

The kit includes a hydraulic unit (in an aluminum housing), power cables, a joystick-style switch (can also be mounted on the handlebar), mounting straps, and a detailed installation and user manual.

Features:

• Hydraulic pump capacity 2.5l/min
• Nominal pressure 180bar
• 800w motor / 12V DC
• Oil tank capacity 1l
• Quick-connect 1/4" hydraulic fittings for two work slings (2-channel)
• Joystick control
• Float position for one cylinder
• The electromagnetic valve can be used to expand the operating range to three cylinders.