Purelux Multi-switch Kytkinpaneeli 4-painiketta

Finally a control panel that's actually suitable for ATV use! Four programmable buttons, a dedicated junction box and IP65 protection, meaning it's water and dust resistant.

Doubtful? Read more and you'll quickly find your shopping pants.

We have tested several different relays and switches. Their installation and use, so this has been proven to actually work. And we use it a lot, we go to places that are not worth going to. In other words, a product that is guaranteed to work!

The switches can be set to three different operating modes: on-off, on when pressed, or flashing. Programming is easy and can be done with just a few button presses.

The panel's RGB backlight automatically adjusts to the ambient lighting, and you can also turn the backlight off if you want. This is good because the buttons can be found even in the dark.

Included is a sticker sheet with 45 pre-labeled images and 5 stickers from which you can design a suitable label for different buttons.

In addition, the panel has a memory. It automatically restores the last used mode when you turn on the power. The panel supports up to 480W in a 12 volt system and 960W in a 24 volt system.

Different circuits have their own current limits: Circuit 1 can handle 30A, circuit 2 20A, circuit 3 10A and circuit 4 can handle 5A. All circuits have their own fuses in the junction box.

The ease of installation comes with a junction box. Power and ground in the junction box, light wires there and nothing else to do but connect. You don't need separate relays when everything is taken care of with this set.

You can download the connection instructions from this page!

Specifications:

• Operating voltage 10-30 V
• Power rating 480W 12V / 960W 24V
• Maximum current 40A
• Includes 50 marking stickers, 45 ready-made images
• IP rating IP65
• Operating temperature -40 - +105°C
• Approvals CE marked
• Memory function on the panel
• Warranty: 12 months
  

Package contents:

• Switch panel 4 switches
• Junction box (fuses here)
• Residual current device 40A
• 4-pole cable
• 2-pole cable
• Power cable
• 2 different mounting brackets for the switch panel
• Fuse box mounting bracket
• 50 marking stickers for marking buttons
• Screw set
• Cable ties
• Operating and installation instructions