Defa Engine heater CFMOTO 850/1000 Gen2

Defa engine heater for CFORCE 850 and 1000 GEN2 models, ZFORCE 950/1000 (including Sport), and UFORCE 800/1000 UTV models.

Includes a radiator heater that is installed directly onto the engine block at the base of the oil filler pipe. Also includes heat transfer paste to enhance thermal conductivity between the heater and the engine.

Easy to install, but you will also need the Defa cable set BW05-460785, which includes the power outlet cable and the vehicle-side connector and cable for the heater.

Preheating the engine is recommended at temperatures below +5 degrees Celsius as it reduces the strain caused by cold starts. Fuel consumption is also reduced when the engine is pre-warmed. It heats the engine oil, making it more fluid in cold weather, which ensures proper lubrication immediately upon starting rather than waiting for the engine to warm up.

Approximately 30 minutes of use is sufficient in light frost, but when temperatures reach -10 degrees, an hour is recommended, and at -20 degrees, two hours.

Fitment:

CForce 850 GEN2 (all versions) 2018-2023 CForce 1000 GEN2 (all versions) 2019-2023

ZForce 950 Sport 2024-> ZForce 1000 2019 - 2021 ZForce 1000 Sport 2021 ->

UForce 800 2015-2021 UForce 1000 (including XL) 2020->

NOTE! Does not fit GEN3 CForce 850/1000 models